KakiDIY built our own 3D printer.
It was a Micromake Kit which runs off an Arduino board on a Delta design. It took us 4 hours in the span of 2 days to assemble it due to some modification required as there are mismatched parts and we are dashing in and out for our meetings.
Continue reading “Self built 3D printer timelapse” »
These microbots looked familiar? You can easily see them in major toy stores. Here’s how you can make them using easily available household products.
Continue reading “Microbots (BristleBots) made simple” »
Lance Armstrong shows you how to change a bicycle’s flat tire. Brought to you by Outside Magazine.
Running out of wall plugs? Or having a size that is too large or too small? Here’s a simple DIY to make your own wall plug that fits and you get to continue with your home improvement DIYs.
Continue reading “Wall Plug DIY” »
Jump starting a car with weak batteries are quite straightforward.
NOTE : Try to use Donor cars which are a larger engine capacity to make the jump start easier. Actually, displacement/engine capacity is not important. Just a rule of thumb for the size of the alternator… For example, in this article, the donor car is a classic Mini Cooper with upgraded 65W Alternator, enough to jump start almost any street cars.
Continue reading “Jump Start A Car” »
What if you took over an old office and you were left over with some tools but missing all the essential parts? For example this vacuum cleaner and an old water scoop.
Read more to see how these parts were savaged and made to work together. Continue reading “Vacuum Fixing” »
Thread tapping is fairly useful if you found that your bolt is jarred loose and has damaged the bolt itself and the threading of whatever it is you are screwing your bolt in to.
Continue reading “Bolt Thread Tapping” »