How to Diagnose and Replace the Battery on a WowGo3 Electric Skateboard Remote

Maintaining the functionality of your WowGo3 electric skateboard remote is essential for a smooth and safe ride. If your remote won’t charge or turn on, the battery might be the issue. Here’s a step-by-step guide on diagnosing and replacing the battery based on the YouTube video tutorial.

Diagnosing the Battery Issue

Step 1: Check the Charging Port

• Ensure the charging cable and port are clean and free of debris.
• Try using a different charger to rule out charger issues.

Step 2: Inspect the Battery

• Open the remote by removing the screws on the back cover.
• Look for any visible signs of damage or corrosion on the battery and its connections.

Step 3: Test the Battery

• Use a multimeter to check the battery’s voltage.
• A healthy battery should read around 3.7V. If the reading is significantly lower, the battery may need replacement.

Replacing the Battery

Step 1: Gather Necessary Tools

• You’ll need a small screwdriver, a new battery (compatible with the WowGo3 remote), and a soldering iron.

Step 2: Remove the Old Battery

• Carefully disconnect the battery from the remote’s circuit board.
• Use the soldering iron to detach the battery wires from the board.

Step 3: Install the New Battery

• Solder the new battery’s wires to the circuit board, ensuring proper polarity (match the positive and negative terminals).
• Place the new battery securely in the remote housing.

Step 4: Reassemble the Remote

• Replace the back cover and secure it with screws.
• Charge the remote fully before use to ensure the new battery is working correctly.

Step 5: Test the Remote

• Turn on the remote to verify it powers up and connects to the skateboard properly.
• Check the charging function to confirm the issue is resolved.

#WowGo3 #ElectricSkateboard #DIY #BatteryReplacement #SkateboardRemote #ElectricSkateboardRepair #WowGo3Remote #SkateboardDIY #RemoteBatteryChange #SkateboardMaintenance #DIYRepair #TechTips #HowTo #plasticcleaning