Chaah Johor Flood – Rescue and Repair
Calling all volunteers to assist with Sorting, Cleaning, Diagnose, Repair, Drying of flooded appliances, furnitures, household items. Discussion and Latest info on KakiRepair Facebook Group : https://www.facebook.com/groups/kakirepair/permalink/6057382197675353/ Details : Date : 18-19th March 2023 (Saturday and Sunday) Time : 9am – 5pm Location : 20, Jalan Tun...
Continue reading
BOSCH AHM 38G setup install tune calibrate
A simple, lightweight and economical BOSCH AHM 38 Hand Lawn Mower is easy enough to setup and operate however the trick to get it installed, tune / calibrated properly wasn’t done right by many. We created this video to help with that.
Continue reading
Repair Mission in Sri Muda – KakiRepair Collaboration
Over the last few days of 2021 till New Year’s Day 2022, KakiRepair’s volunteers along with other collaborators volunteers in Taman Sri Muda flood community to contribute our knowledge, manpower and skills to help extract, clean and restore flooded victims’ electric and electronic appliances. Over the duration of...
Continue reading
Cleaning the inside of Electrolux double layered glass door oven
Cleaning the inside of Electrolux double layered glass door oven. (And other convection oven doors). This video shows the steps to open up the Electrolux (an other compatible convection oven double glass door) to clean the inner glass.
Continue reading
Upgrading Ender 3 V2 stock Extruder to Metal
The Creality Ender 3 V2 is a remarkable machine and had plenty of great upgrades from the predecessor Ender 3 and Ender series. However, it has a flaw on the extruder as it is made from plastic and often breaks. This video shows how to upgrade the extruder...
Continue reading
Campervan, Caravan, Motorhome and Camping site in Malaysia and Thailand
As KakiDIY’s MakerVan and overlander are gearing up to go on our nationwide KakiRepair tour, we started to do some research on places in Malaysia where we can set up camp and run repair activities with rural folks. Stumbled upon this map which is useful.
Continue reading
KakiRepair on Epic Journal
“According to our feedback survey, not more than 40 percent of the things are actually repaired at these events,” Johnson says. “But everyone, whether attending as volunteers or people looking to get things fixed, 100 percent of them answered that they learned something new.”
Continue reading
KakiDIY on BFM 89.9
KakiDIY is honoured to have BFM 89.9 the business station interviewing our founder Johnson Lam on KakiDIY and the KakiRepair movement.
Continue reading
Self built 3D printer timelapse
KakiDIY built our own 3D printer. It was a Micromake Kit which runs off an Arduino board on a Delta design. It took us 4 hours in the span of 2 days to assemble it due to some modification required as there are mismatched parts and we are...
Continue reading