How to Set the Time on Your Honda PCX160i Motorcycle

Setting the correct time on your Honda PCX160i motorcycle is essential for keeping track of your rides and ensuring timely maintenance. If you’re unsure how to adjust the clock, this guide will walk you through the process, inspired by the instructional video from YouTube.

Step-by-Step Guide

Step 1: Turn on the Ignition

Start by turning the ignition key to the “ON” position. Ensure the motorcycle’s display panel is active.

Step 2: Access the Clock Setting Mode

Locate the “SEL” (Select) and “SET” buttons on the left handlebar. These buttons control the settings menu on the display.

Step 3: Enter Clock Adjustment Mode

Press and hold both the “SEL” and “SET” buttons simultaneously for a few seconds until the clock starts flashing on the display. This indicates you are in the clock adjustment mode.

Step 4: Set the Hour

• Use the “SET” button to adjust the hour.
• Each press will increment the hour by one. Continue pressing until the correct hour is displayed.

Step 5: Set the Minutes

• Once the hour is set, press the “SEL” button to switch to the minute setting.
• Use the “SET” button to adjust the minutes in the same manner as the hour.

Step 6: Confirm the Time

After setting the correct time, press the “SEL” button again to confirm and save the settings. The clock should stop flashing, indicating that the time has been set.

Step 7: Verify the Time

Double-check the display to ensure the time is accurate. Turn the ignition off and back on to make sure the settings have been saved properly.